RP2350_MIDI_Lighter/Housing/RP2350_MIDI_Lighter_PCB.scad

use <MCAD/boxes.scad>
include <RP2350_MIDI_Lighter_Definition.scad>


module PCB()
{
	color([0.0, 1.0, 0.0])
	difference()
	{
		union()
		{
			translate([PCB_W/2, PCB_H/2+5, 0])	roundedBox([PCB_W, PCB_H-10, PCB_T], 2, true, $fn=100);
			translate([PCB_W/2, PCB_H/2-5, 0])	roundedBox([PCB_W, PCB_H-10, PCB_T], 1, true, $fn=100);
		}

		Screw_Holes_M3();
	}

	translate([0, 0, PCB_T/2]) translate(Power_Plug) 	Power_Plug();
	translate([0, 0, PCB_T/2]) translate(Button) 		Button();
}

module PCB_Cutouts_Top()
{
	translate([0, 0, PCB_T/2-0.3]) translate(Power_Plug)	Power_Plug_Cutout();
	translate([0, 0, PCB_T/2-0.5]) translate(Button) 		Button_Cutout();
	translate([0, 0, PCB_T/2-0.0]) translate([0, 33, 0]) 	USB_Cutout();
}

module PCB_Cutouts_From_Bottom()
{
	translate([0, 0, PCB_T/2-0.3 + 09.7]) 	translate(Power_Plug)	Power_Plug_Cutout_For_Bottom();
	translate([0, 0, PCB_T/2-0.5]) 			translate(Button) 		Button_Cutout_For_Bottom();
	translate([0, 0, 0]) translate([0, 33, 0]) 						USB_Cutout_Small();
	translate([0, 0, 0]) translate([0, 33, 0])						Adafruit_QT_Py_Cutout();
}

module Screw_Holes_M3()
{
	for (i = Mounting_Holes) { 
		translate(i) Screw_Drill(Drill_M3);
	}
}

module Screw_Rings_M3()
{
	for (i = Mounting_Holes) { 
		translate(i) Screw_Ring_M3(Ring_M3_H);
	}
}

module Spacer(height)
{
	difference()
	{
		cylinder(h=height, d=5, $fn=6);
		Screw_Drill(Drill_M3);
	}
}

module Spacer_Top()
{
	color([0.3, 0.6, 0.0])
	for (i = Mounting_Holes) { 
		translate(i) Spacer(Spacer_Top_Height);
	}
}

module Spacer_Bot()
{
	color([0.3, 0.6, 0.0])
	translate([0, 0, -Spacer_Bot_Height])
	for (i = Mounting_Holes) { 
		translate(i) Spacer(Spacer_Bot_Height);
	}
}

module Button()
{
	translate([0, 0, 7.4/2])
	{
		translate([-3.5/2, 0, 0])	cube([3.5, 7.3, 7.4], center=true);
		
		color([1, 0.65,0 ])
		translate([+3.9/2, 0, 0])	cube([3.9, 3.5, 3.5], center=true);
	}
}

module Button_Cutout()
{
	Button_W = 8;
	Button_H = 8;

	Button_X = 30;
	Button_Z = 20;
	
	translate([+Button_X/2, 0, -Button_Z/2 + Button_H])
	cube([Button_X, Button_W, Button_Z], center=true);
}

module Button_Cutout_For_Bottom()
{
	Button_W = 8;
	Button_H = 8;

	Button_X = 1.5;
	Button_Z = 20;
	
	translate([+PCB_W - Button[0] + Wall_PCB_GAP + Button_X/2 - eps, 0, +Button_Z/2])
	cube([Button_X, Button_W, Button_Z], center=true);

	translate([+PCB_W - Button[0] + Wall_PCB_GAP + Button_X/2 - eps, 0, 4.75])
	cube([3*Button_X, 3.5, 3.5], center=true);
}

module Power_Plug()
{
	color([0.1, 0.1, 0.1])
	translate([10.625, -2.4, 0])
	difference()
	{
		translate([-3.5, 0, 0])
		union()
		{
			translate([3.5/2, 0, 11/2])							cube([ 3.5, 9, 11.0], center=true);
			translate([-10.9/2, 0, 6.4/2])						cube([10.9, 9,  6.4], center=true);
			translate([-10.9/2, 0, 6.4])	rotate([0, 90, 0])	cylinder(h=10.9, d=9, center=true, $fn=60);
		}

		translate([-9.2/2, 0, 6.4])
		rotate([0, 90, 0])
		cylinder(h=9.2+1, d=6.3, center=true, $fn=60);
	}
}

module Power_Plug_Cutout()
{
	Plug_D = 14.5;
	Plug_W = 10;
	Plug_H = 11.5;
	
	Plug_X = 30;
	Plug_Z = 20;

	translate([+Plug_X/2-Plug_D+5.08, -2.4, -Plug_Z/2 + Plug_H])
	cube([Plug_X, Plug_W, Plug_Z], center=true);
}

module Power_Plug_Cutout_For_Bottom()
{
	Plug_D = 14.5;
	Plug_W = 10;
	Plug_H = 11.5;
	
	Plug_X = 30;
	Plug_Z = 20;

	translate([+Plug_X/2-Plug_D+5.08, -0, -Plug_Z/2 + Plug_H + 5])
	cube([Plug_X, Plug_W, Plug_Z], center=true);

	translate([0, 0.5, -3])
	rotate([0, 90, 0])
	cylinder(d=11, h=Plug_X, center=true, $fn=60);
}

module USB_Cutout()
{
	USB_H = 3.2;
	USB_W = 9;
	USB_D = 22;
	
	USB_Y = 9.5;
	USB_Z = 20;
	
	
	PCB_H = 1.6;
	PCB_W = 18;
	PCB_D = 22;

	PCB_X = 40;
	PCB_Z = 5;
	
	translate([0, 0, -USB_Z/2 + PCB_H + USB_H - 0.5])	cube([USB_D, USB_Y, USB_Z], center=true);
	// translate([-PCB_X/2+PCB_D, 0, -PCB_Z/2 + PCB_H])	cube([PCB_X, PCB_W, PCB_Z], center=true);
}

module USB_Cutout_Small()
{
	USB_H = 3.2;
	USB_W = 9;
	USB_D = 22;
	
	USB_Y = 9.5;
	USB_Z = 3.5;
	
	
	PCB_H = 1.6;
	PCB_W = 18;
	PCB_D = 22;

	PCB_X = 40;
	PCB_Z = 5;
	
	translate([0, 0.5, USB_Z/2 + PCB_H + 1.0])	
	rotate([0, 90, 0])
	roundedBox([USB_Z, USB_Y, USB_D], 1, true, $fn = $preview ? 32 : 100);
	// cube([USB_D, USB_Y, USB_Z], center=true);
}